SCB10-2500/10 dry-type transformer price, parameters, dimensions, size
06-26 2025 | By:
SCB10-2500/10 dry-type transformer
Dry type epoxy resin transformer
Model: SCB10 series
Rated capacity: 2500kVA
Voltage ratio: 10/0.4kV
Connection group: Dyn11/ Yyn0
No-load loss: 2450W
Load loss: 15445W
Short-circuit impedance: 6%
Frequency: 50Hz
Technical standard: GB 20052-2020
Quality standard: ISO 9001:2015; ISO 14001:2015
SCB10-2500kVA 10/0.4kV dry-type distribution transformer Introduction
scb10 transformer refers to epoxy resin dry-type transformer, S is three-phase, C is epoxy resin cast dry-type transformer, B is the transformer coil is wound with copper foil material, 10 is the transformer performance level code, 10/0.4 means that the rated high voltage side of the transformer is 10kv, and the low voltage side is 0.4kv.
amorphous alloy dry-type transformers
Scb10-2500KVA Dry-type Transformer Advantages
– Small size and light weight;
– Can be cooled by air, no insulating oil is required for isolation, reduce pollution, and easy maintenance and good safety.
– Can make the secondary side of SCB10 dry-type transformer output a constant amplitude voltage.
– Can improve the quality of electric energy, can obtain sinusoidal input current and output voltage and can achieve unity power factor, and the voltage and current on both sides of the SCB10 dry-type transformer are controllable, so the power factor can be adjusted arbitrarily.
SCB10-30kva~2500kva/10/0.4kv dry-type transformer technical parameter table
| Type | Boundarydimension(mm) | |||||
| a | b | C | d | h | j | |
| SC10-30/20(10) | 770 | 650 | 500 | 500 | 890 | 265 |
| SC10-50/20(10) | 790 | 650 | 500 | 500 | 990 | 275 |
| SC10-80/20(10) | 830 | 650 | 500 | 500 | 1050 | 285 |
| SC10-100/20(10) | 890 | 650 | 500 | 500 | 1100 | 300 |
| SC10-160/20(10) | 1350 | 650 | 500 | 500 | 1250 | 325 |
| SC10-200/20(10) | 1350 | 650 | 500 | 500 | 1250 | 325 |
| SCB10-250/20(10) | 1500 | 800 | 680 | 700 | 1400 | 510 |
| SCB10-315/20(10) | 1520 | 800 | 680 | 700 | 1460 | 520 |
| SCB10-400/20(10) | 1540 | 800 | 680 | 700 | 1510 | 520 |
| SCB10-500/20(10) | 1550 | 1050 | 800 | 800 | 150 | 520 |
| SCB10-630/20(10) | 1560 | 1050 | 800 | 800 | 1580 | 520 |
| SCB10-800/20(10) | 1620 | 1050 | 800 | 800 | 1650 | 545 |
| SCB10-1000/20(10) | 1680 | 1050 | 800 | 800 | 1700 | 570 |
| SCB10-1250/20(10) | 1750 | 1050 | 800 | 800 | 1850 | 620 |
| SCB10-1600/20(10) | 2200 | 1300 | 1050 | 1050 | 2150 | 750 |
| SCB10-2000/20(10) | 2300 | 1300 | 1050 | 1050 | 2250 | 800 |
| SCB10-2500/20(10) | 2450 | 1300 | 1050 | 1050 | 2300 | 850 |
| Ratedcapacity (kVA) | Voltagegroup | Vector group | Impedance voltage (%) | No-load loss (W) | Loadloss120℃ (W) | No-load current (%) | ||
| HV (kV) | Tap range | LV(kV) | ||||||
| 30 | 10-24 | ±2×2.5% | 0.4 | Dyn11 or YynO | 6 | 300 | 1100 | 2.2 |
| 50 | 340 | 1240 | 2.0 | |||||
| 80 | 420 | 1500 | 2.0 | |||||
| 100 | 540 | 2000 | 1.8 | |||||
| 160 | 680 | 2470 | 1.5 | |||||
| 200 | 740 | 2950 | 1.5 | |||||
| 250 | 850 | 3420 | 1.3 | |||||
| 315 | 970 | 4090 | 1.3 | |||||
| 400 | 1150 | 4850 | 1.1 | |||||
| 500 | 1350 | 5800 | 1.1 | |||||
| 630 | 1530 | 6840 | 1.0 | |||||
| 800 | 1760 | 8270 | 1.0 | |||||
| 1000 | 2070 | 9790 | 0.85 | |||||
| 1250 | 2390 | 11540 | 0.85 | |||||
| 1600 | 2790 | 13870 | 0.85 | |||||
| 2000 | 3240 | 16390 | 0.7 | |||||
| 2500 | 3870 | 19380 | 0.7 | |||||
2500KVA three-phase dry-type transformer meets product quality standards
ZTELEC Yuguang Electric Technology (Henan) CO., Ltd. 2500kVA three-phase dry-type transformer undergoes strict quality control at all stages from input to output to ensure that it fully meets the strict requirements of domestic and international standards.
1. Quality Management System ISO 9001: 2015
The operation of the entire ZTELEC Yuguang Electric Technology (Henan) CO., Ltd. system is strictly controlled and managed. This ensures the quality of the product at all stages, from receiving customer requirements to design, materials, production, installation, testing, packaging, delivery, after-sales, all of which are operated under a strict and tight process.
2. Environmental Management ISO 14001: 2015
ZTELEC Yuguang Electric Technology (Henan) CO., Ltd. took the lead in applying the ISO 14001: 2015 environmental management system. The implementation of this process demonstrates ZTELEC Yuguang’s responsibility to a wide range of customers. ZTELEC Yuguang is committed to providing the most environmentally friendly high-quality technology products.
3. Certification Certificate ISO / IEC 17025: 2017
The ISO / IEC 17025: 2017 certification confirms that ZTELEC Yuguang’s technical quality meets the requirements of all specific international testing and calibration laboratory standards. All ZTELEC Yuguang products are fully tested in qualified laboratories before leaving the factory to ensure stable quality and provide customers with absolute peace of mind.
You may also find these interesting:
