13.2kv Padmount transformer
07-30 2025 | By:
ZGS series pad-mounted transformer offers a low-cost, highly reliable, and intelligent urban power distribution solution.
• 3-phase pad-mounted transformers combine transformers, switchgear, fuses, tap-changers, low-voltage distribution equipment, and other auxiliary equipment to meet various user requirements, including energy metering, reactive power compensation, and low-voltage branching.
13.2kv Padmount transformer
• Rated AC frequency is 50Hz/60Hz, and the maximum operating voltage is up to 38.5kV. Other capacities include 150kVA, 200kVA, 250kVA, 300kVA, 315kVA, 400kVA, 500kVA, 630kVA, 750kVA, 800kVA, 1000kVA, 1500kVA, and 2500kVA.
• Pad-mounted transformers are widely applicable in industrial parks, urban residential areas, commercial centers, high-rise buildings, and other locations.
• Products are primarily exported to North America, East Asia, Southeast Asia, the Middle East, and other countries and regions. OEM/ODM services are also available.
• Implementation standards: ANSI C57, IEC60067, GB 1094, GB17467-2010, GB/T 14048.1, GB 4208
Outdoor Padmount transformer
Technical Parameter:
Product Parameters
Capacity: 75kVA, 200kVA, 500kVA, 1000kVA, 1250kVA, 1500kVA, 1600kVA, 2000kVA, 2250kVA, 2500kVA, 3000kVA
Rated Voltage: 6kV, 7.2kV, 10kV, 11kV, 13.2kV, 13.8kV, 20kV, 33kV, 35kV;
Maximum Operating Voltage (kV): 38.5kV
Usage Conditions:
1. Temperature: Maximum daily temperature (°C): 40°C; Minimum daily temperature (°C): -25°C; Maximum diurnal temperature range (K): 25°C; Average temperature of the hottest month (°C): 30°C; Average annual temperature (°C): 20°C; Average daily relative humidity (≤%): 95%; Average monthly relative humidity (≤%): 90%
2. Altitude (≤m): 1000
3. Solar radiation intensity (W/cm²): 0.1
4. Maximum ice thickness (mm): 10
5. Maximum average wind speed at 10m above ground level, sustained for 10 minutes (m/s): 35
6. Horizontal ground acceleration (m/s²): 2
7. Installation location: Outdoors; 8. Pollution degree: III
Ordering instructions
When ordering, customers should provide the following information:
• Main circuit diagram and secondary circuit system diagram.
• Auxiliary circuit electrical schematic and terminal layout
• Equipment layout, assembly diagram, and floor plan.
• Brand, model, specifications, and quantity of the equipment’s main electrical components.
• Cable entry and exit methods and cable specifications.
• Equipment surface color (RAL color spectrum).
You may also find these interesting:
