HV and LV coils for resin insulated dry type transformers
08-11 2025 | By:
HV and LV coils for resin insulated dry type transformers
Transformer winding
•cast resin windings have high mechanical strength and no partial discharge
•thansformer coils are manufactured with aluminium or copper conductors
•Designed with HV/LV foil winding and round wire winding
•our team cast resin winding technology, resin guarantees the best dielectric performance, short-circuit resistance, and long-term reliability, customized up to 15mva transformer winding
•make dry type windings a cost-effective choice for customers looking to optimize their transformer investments, especially for applications where maintenance and safety are critical concerns.
•transformer winding are not subjected to wetting and polluting
•Operation safety, transformer winding are not flammable and can not be a source of fire
High-Voltage (HV) and Low-Voltage (LV) cast resin winding coils
HV and LV coils for resin insulated dry type transformers
| Main Specification | |
| Transformer Type | cast resin |
| Rated capacity | up to 15mva |
| Rated voltage | up to 36kv |
| Frequency | 50/60Hz |
| Phase | 3 Phase |
| Winding material | Copper /Aluminum |
| Insulation class | F, H, C |
| Vector group | Dyn11, Yyn0, |
| Climate | C5 |
| Environmental | E4 |
| Fire behaviour | F1 |
| Temperature operation | +50~ -60℃ |
| Short circuit resistance | 4-8%( on request) |
| Standard | IEC, AS, EN, IEEE, GOST |
HV and LV coils for resin insulated dry type transformers
Routine test
- Measurement of winding resistance
- Measurement of voltage ratio and check of phase displacement
- Measurement of short-circuit impedance and load loss
- Measurement of no-load loss and current
- Separate-source AC withstand voltage test
- Induced AC withstand voltage test
- Partial discharge measurement
Type test
- Lightning impulse test
- Temperature-rise test
Special test
- Partial discharge measurement
- Measurement of sound level
- Short-circuit test
You may also find these interesting:
